Yes! You may get a confirmation email that shows lower case letters on the text description, This is due to the customer using lower case letters when building plates (This is a glitch we are working on)

But all plates are printed using capital letters.

This isn’t an advertisement. However, it’s a legal requirement to have the manufacturer’s name and postcode on license plates.

Never a silly question!

We add a protective film layer over the front of all of our plates to protect them in transit, This can give the look of a darker plate,

Please peel off the removable front protective film, A little heat from a hairdryer will help you find an edge of the cover.

Standard print
4D 3 and 5mm
3D Gel
5D
Are all legal in the UK

We aim to dispatch all orders within 24 hours of you placing the order, This can sometimes be delayed by busy times and complicated orders such as custom plates etc

Yes they are all legal and conform to BSAU145e standards

Here are our current available text styles on N1 (not available on all sizes of plates, But 90%)

Regular – Normal flat print

3d Gel – Just Gel digits direct onto plate (Legal Size)

4D 3mm – 3mm ‘high’ thick 4D Laser cut digits (Legal size)

4D 5mm – 5mm ‘high’ thick laser cut digits (Legal Size)

5D 3mm – 3mm laser cut 4D digits with the 3D gel on top of these

5D 5mm – 5mm laser cut 4D digits with the 3D gel on top of these.

When you type your order out on our builder it will appear exactly as you type it so we advise you to carefully check the spacing as we can offer no compensation or reprints due to typing errors on your behalf, a warning pop up automatically appears if you don’t add a space to your registration and you have to click / tick the accept box to progress beyond this point. Our process is somewhat like a home network so when purchase the order and pay your registration film will automatically print off in our production area and will be stored until the documents have been seen ,verified and processed by our admin team, then a signal ticket is sent to the production team that the order can now be bonded to the solid backing and thus turning it into a legal number plate, at no point do the production team know how you have requested the spacing of your plate and will not check against the original order, so we are in no way responsible for the spacing you typed in. Please carefully type your correct registration and correct spacing.

What are the sizes of our short and Hex type plates?

Short Plates

7 digits Including space letter short is 470 x 111mm

6 digits Including space letter short is 409 x 111mm

5  digits Including space letter short is 348 x 111mm

4 digits Including space letter short is 287 x 111mm

Hex Plates

5 letter plates are 435mm wide

6 Letter are 514mm wide

7 letter are 590mm wide

Simple answer….No we don’t.

Some customer prefer to have no holes and use the sticky pads for a really clean look, Also there are far too many variants in placement on cars.

No plate seller will pre drill number plates, We send a comprehensive fitting instructions email to you after purchase which will help with all your plate fitting questions.

Hello, Unfortunately this is no longer allowed.

All modern number plates are yellow on the rear and white on the front.

If you would like a number plate with a green EV flash, then yes, you can get one of these from us. Please find them in the plate sizes menu.

For the correct format you should only add one space to your registration. The space should be in the correct location, If you choose LEGAL PLATES on the builder, Then the builder will automatically space your plates legally.

please refer you your V5 log book and existing number plates. If you are still unsure please contact us for more information. See below examples for correctly spaced registrations vs incorrect:

Correct: AB21 AAA

Incorrect: AB 21AAA – AB 21 AAA – AB21AAA

You cannot mis-space legal plates.

Yes borders are road legal can be added via the plate builder.